Massachusetts Electric Co
Investor-owned utilityMassachusettsWebsite ↗
- Customers (2025)
- 1,399,921
- Meters
- 1,466,245
- Smart meters (AMI)
- 380,146 (26%)
- Radio-read meters (AMR)
- 1,038,878 (71%)
- Grid region
- NPCC · ISONE
- EIA utility number
- 11804
Counts: EIA Form 861, data year 2025.
Meters installed
Landis+Gyr· Landis+Gyr Gridstream RF (Gridstream Connect RF mesh)Rolling out
Wi-SUN · 2023–2027 · 1,400,000 meters [source]
Models: Revelo E360
Landis+Gyr release (2023-01-13): 1.4M Revelo grid sensors on Gridstream Connect (Wi-SUN certified) per the MDPU grid modernization order, 2023-2027. Sense lists National Grid MA as a Sense-enabled Revelo deployment. 500,000+ installed by spring 2026 (National Grid). Residential model assumed E360 (polyphase E660 not stated). Itron was recommended in 2016 but not used.
Itron, Inc.· Itron OpenWay (CG-Mesh IPv6, with Cisco)Replaced
RF mesh · since 2013 · 15,000 meters · Pilot [source, unverified]
Smart Energy Solutions pilot (Worcester): about 15,000 customers with Itron meters and Itron/Cisco network equipment; extended in 2016. Assumed superseded by the Revelo rollout (status legacy, verify). Re-checked 2026-11-16: no primary source found on the pilot meters' fate (looked: Worcester SES pilot coverage, National Grid 3BL releases): pilot ran 2015-01-01 to 2016-12-31 with an extension to end-2018 requested; replacement by Revelo not stated, status legacy still an assumption.
Getting your usage data
- Interval you can see
- 15 minutes
- Available
- A few days
- Green Button
- Download and Connect My Data connect
- Pair a device to the meter
- Available (Sense Home app (meter-based, no extra hardware))
- Meter radio readable with an SDR
- Not stated
- Smart meter opt-out
- Allowed, with a fee ($26)
- Research
- Researched [source, unverified]
Massachusetts Electric Co d/b/a National Grid. Landis+Gyr Revelo AMI on Gridstream Connect (Wi-SUN) for 1.4M customers 2023-2027; 500,000+ installed (spring 2026). National Grid pages (search snippets; nationalgrid.com and nationalgridus.com answer 403 to automated reads, not retried): smart meter customers see 15-minute usage in MyAccount, typically within 24-48 h of install (up to 30 days); Sense Home offered at no extra cost to residential smart meter customers (meter-based Sense on Revelo; needs Wi-Fi near the meter), counted as han_program available. Green Button: National Grid MA has a Green Button Connect page (cmd_url); Nectar Climate (secondary) says Green Button XML download from Track Usage and CMD via UtilityAPI, so third_party_api left blank. Opt-out page snippet: $33 one-time and $26/month (newer than the M.D.P.U. No. 1500 figures of $26 / $11 in seed/states/MA); latency multi_day is the 24-48 h figure. Legacy drive-by AMR (EIA AMR) vendor not sourced, so ert_broadcast not_stated. Re-checked 2026-11-16: not re-fetched (nationalgrid.com/nationalgridus.com answer 403 to automated reads); no new primary source. National Grid MA opt-out page snippets (2026-11-16) agree: $33 one-time change-out fee (only if a smart meter is already installed) and $26/month manual reading, residential R1/R2 only, subject to DPU approval; AMI brochure snippet says usage is viewable in MyAccount without stating the interval. Snippets only, verify kept.
- Pair a Zigbee energy monitor →
- About Green Button →
- Read the meter's test LED →
- Massachusetts data access rules →
Meter types over time
Counties served
Massachusetts: Barnstable, Berkshire, Bristol, Essex, Franklin, Hampden, Hampshire, Middlesex, Norfolk, Plymouth, Suffolk, Worcester
EIA lists a county when the utility serves any part of it.
Get live readings from your own meter
We are building Utility Brain, a small receiver that reads your electric meter the way your utility does and shows your usage minute by minute. Join the list and we'll tell you when it works with your meter.