Utility Brain

Read your electric meter with an SDR

Millions of US electric meters carry an Itron ERT (Encoder Receiver Transmitter) module. It broadcasts the meter's register reading on the 900 MHz ISM band so a meter reader can collect it from a passing truck or a fixed collector. The broadcast isn't encrypted. A $30 RTL-SDR USB dongle and the open-source program rtlamr can receive it, so you can log your own meter.

Will it work on my meter?

  • One-way AMR meters (the "drive-by" kind) are the best case. If your utility reports AMR meters to EIA, and its page here lists ERT, it very likely works.
  • Some smart meters also carry an ERT radio next to their two-way network radio. The meter's page in our catalog says when rtlamr is known to decode it.
  • Mesh and tower smart meters (Landis+Gyr Gridstream, Itron OpenWay mesh, Sensus FlexNet, Aclara RF) send readings over the utility's network in formats a consumer receiver can't use. For those, try Zigbee HAN or the test LED.

Meters in our catalog that rtlamr decodes: Itron, Inc. CENTRON C1SR, Itron, Inc. R300 ERT family (R300, R300C, R300CD, R300S, R300SD, -HP), Itron, Inc. R300 net-metering ERT (R300S2, R300SD3, R300CD3-HP), Itron, Inc. 40-series electric ERT (40EN, 40ER, 40ER-1, 40ES, 41ER-1), Itron, Inc. 45-series electric ERT (45EN-1, 45ER-1, 45ES-1), Itron, Inc. 50ESS-57ESS electric ERT series, Itron, Inc. C1A-2 / C1A-3, Itron, Inc. C3A-1H / C3A-1L, Itron, Inc. AMI4 / AMI6 / C2SOD / CVSO-B, Schlumberger Electricity Metering CENTRON OOK RF, Itron, Inc. 40G gas ERT, Itron, Inc. 100G gas ERT (DLN, DLS, DLT), Landis+Gyr AirPoint 41 Series, Landis+Gyr AirPoint FOCUS, Landis+Gyr AirPoint I-210 / HP AirPoint I-210, Landis+Gyr AirPoint iCon, Landis+Gyr HP AirPoint, Neptune Technology Group R900 MIU, Itron, Inc. 20G / 25G gas ERT (incl. 25G remote), Itron, Inc. 40GB gas ERT (and 40GB Remote), Itron, Inc. 100T / 100T-CP cathodic protection telemetry ERT, Vision Metering ST single-phase meter (i-meter ST), Vision Metering XT / XT-E / XT-UL meter platform.

What you need

  • An RTL-SDR dongle (RTL2832U based) and a small antenna. The stock antenna is fine near the meter.
  • A computer or Raspberry Pi with rtl_tcp (from the rtl-sdr package) and rtlamr.
  • Your meter's ID. It's printed on the faceplate, usually near a barcode.

Receiving it

rtl_tcp &
rtlamr -msgtype=scm,scm+,idm -format=json

You'll see every ERT meter in range, often dozens. Pick yours by ID with -filterid=<your meter id>. The Consumption field is the meter's register: the same number as the display, in the meter's units, usually kWh. Some modules also send IDM (interval data) messages. Those carry recent consumption in short intervals as well as the register.

What you get, and what you don't

  • The register advances in whole units, so a reading tells you energy used since the last one, not instantaneous power. Over an hour, that's plenty to see what's running.
  • The module transmits on its own schedule. You can't ask it for a reading.
  • You are only listening. rtlamr doesn't transmit and doesn't touch the meter.

Water and gas meters use the same band. rtlamr also decodes Neptune R900 water meters (-msgtype=r900), which is where Utility Brain started: our receiver tracks R900 water meters on its own radio chip, with no PC.

A receiver that does this for you

Utility Brain is a small Wi-Fi receiver that listens for your meter and charts your usage without a PC or an SDR to look after. Join the list to hear when it supports your meter.

We only use this to tell you about Utility Brain. Privacy.